/ Each
Dixon® DM6 Hose Mender, 3/4 in, Hose Shank, Steel, Domestic
Part #10822803
Legacy #10822803
MFG #DM6
Dixon® Hose Mender, Fitting/Connector Type: Coupling, 3/4 in Nominal, Hose Shank End Style, 4-1/32 in Length, Steel, Zinc Plated, 25/32 in Dia, Domestic
/ Each
Product Attributes
Brand : Dixon®
Fitting/Connector Type : Coupling, Mender
Nominal Size : 3/4
End Style : Hose Shank
Length : 4-1/32
Material : Steel
Product Documents
Product Features
- Hose mender for repairing hoses
- Hose mender for repairing hoses
- Hose mender for repairing hoses
- Connects to a hose on both ends
- Connects to a hose on both ends
- Connects to a hose on both ends
- Zinc plated steel for greater corrosion resistance than unplated steel
- Zinc plated steel for greater corrosion resistance than unplated steel
- Zinc plated steel for greater corrosion resistance than unplated steel
- Barbed fitting for a tight seal on hoses
- Barbed fitting for a tight seal on hoses
- Barbed fitting for a tight seal on hoses
- Not for compressible products such as air, nitrogen, or steam
- Not for compressible products such as air, nitrogen, or steam
- Not for compressible products such as air, nitrogen, or steam
- For use with a hose clamps or crimp sleeve or ferrule
- For use with a hose clamps or crimp sleeve or ferrule
- For use with a hose clamps or crimp sleeve or ferrule
- Menders are not for compressible products such as air, nitrogen or steam
- Menders are not for compressible products such as air, nitrogen or steam
- Menders are not for compressible products such as air, nitrogen or steam
- The working pressure may vary with the construction of the hose, the type of clamping system used and the application
- The working pressure may vary with the construction of the hose, the type of clamping system used and the application
- The working pressure may vary with the construction of the hose, the type of clamping system used and the application
- In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement
- In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement
- In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Do not use in connection with drinking water
- Do not use in connection with drinking water
- Wash hands after handling
- Wash hands after handling
- Wash hands after handling